Japanese NSK KOYO Thrust Ball Bearings 52211 Manufacturer

Thrust Ball Bearings 52211 1.low pice and high quality 2.Brass cage 3.china bearing manufacturer 4.excellent service

Japanese NSK KOYO Thrust Ball Bearings 52211 Manufacturer

Single Direction thrust ball bearings

Trade terms:Packaging Detail:  carton or wooden box Delivery Detail:  15 days after your orderPayment:L/C  T/T  Western UnionPort:Qingdao,Shanghai port 

Delivery ways:DHL,UPS door to door service,by sea,air,ect

Characteristic:1.low pice and high quality steel2.excellent service

3.Available in two designs: single direction and double direction

Bearings with a sphered housing washer can be used together with a sphered seat washer to compensate for misalignment between the support surface in the housing and the shaft Sphered seat washers are available from NSK but must be ordered separately.Can accommodate axial loads in one direction and thus locate a shaft axially in one direction,Must not be subjected to any radial load.

Supply the six types of ball bearings: 

    1. Three point contact ball bearing Single row angular contact ball bearings when subject to pure radial loads, each load of the ball by two contacts with a channel, but with little contact with the other channel. Under pure axial load, each ball with only one contact with each channel.

    Two. Locking counterbored ball bearing ball bearings Outer ring of a rib removed all or part of the groove-type ball bearings.

    3. Deep groove ball bearing Each ring has a cross-section are approximately one-third of the circumference of the ball groove type raceway continuous radial ball bearings.

    4. Four point contact ball bearing Single row angular contact ball bearings, when subject to pure radial loads, each load of the ball by each of the two-channel access points, and by the pure axial load, the only point of contact.

    5. Single row double-directino thrust ball bearing Contact angle greater than 45 ° in the four-point contact ball bearings.

    6. Thrust ball bearing Rolling body is thrust ball bearing.

Install thrust bearing

Install thrust bearing, they should test shaft ring and shaft centerline perpendicularity. Method is to dial gauge fixed on the tank shell face, so touch the table top of the head ring in the bearing raceway upper rotating shaft bearings, side observation dial gauge pointer, if the pointer yaw show ring and shaft axis is not perpendicular to the centerline. Tank-shell holes deeper, we can still head with the lengthening of the dial gauge tested.

Item	old Item	d	d	h(mm)	Cr	Cor	Grease	oil	weight
		(mm)	(mm)		(kN)	(kN)	(r/min)	(r/min)	(kg)
52222	38222	110	160	67	148	431	1200	1800	-
52226	38226	130	190	80	203	622	970	1500	-
52230	38230	150	215	89	244	768	840	1300	-
52234	38234	170	240	97	269	874	750	1150	-
52240	38240	200	280	109	314	1110	620	950	-
52244	38244	220	300	110	342	1310	580	900	-
52202	38202	15	32	22	16.5	24.8	4800	6700	0.082
52203	-	17	35	13.2	—	—	—	—	0.0506
52204	38204	20	40	26	22.3	37.7	3900	6000	0.144
52205	38205	25	47	28	27.7	50.4	3600	5500	0.23
52206	38206	30	52	29	28.1	54.3	3400	5200	0.27
52207	38207	35	62	34	40.7	83.8	2900	4500	0.42
52208	38208	40	68	36	46.9	98.3	2700	4200	0.54
52209	38209	45	73	37	47.7	105	2600	4000	0.64
52210	38210	50	78	39	48.5	111	2300	3600	0.71
52211	38211	55	90	45	69.4	159	2100	3200	1.12
52212	38212	60	95	46	73.6	179	1900	3000	1.15
52213	38213	65	100	47	74.8	189	1900	2900	1.36
52214	38214	70	105	47	73.6	189	1800	2800	1.52

Our Service:

· Reply your Enquiry in 24 work hours.

· Experienced staffs answer all your questions influne English

· Customized design is available,OEM&ODM are welcome.

· Special discount and protection of sales area provide to our distributor.

Company Introduction

Jinan Kelunte Bearing Co., Ltd. is located in Jinan, ShangDong. We are as a specialized manufacturer and 

exporter of bearings. And has passed ISO9001-2000 quality system certification, the products are widely used. 

Welcome to visit our factory website The bearings you need, I plant on the customer's commitment: responsible for quality in the end, the customer service in the end.

Management Certification	ISO 9001:2000 ISO 14001:2004 ISO/TS 16949
Contract  Manufacturing	OEM Service Offered   Design Service Offered   Buyer Label Offered
Welcome to our website	www.kelunte.en.alibaba.com

  

Japanese NSK KOYO Thrust Ball Bearings 52211 Manufacturer